| Part
Description |
Part Number |
SHO NUT Price |
ADD to Cart |
| SHO NUT Performance Cams |
|
|
|
| SHO NUT Performance
Tri-Flow cams, $100 core added in cart for cam cores, $45 shipping added to
order, add a shim rental set to your order if you need them (full refund
given on shims when returned, i.e. free shim rental with cam purchase) IN
STOCK |
SNP-TFC |
800.00 |
|
| SHO NUT Performance
Plus 40 cams, $100 core added in cart for cam cores, $45 shipping added to
order, add a shim rental set to your order if you need them (full refund
given on shims when returned, i.e. free shim rental with cam purchase)
(special order, 25% deposit for next batch) |
SNP-P40C |
800.00 |
|
| SHO NUT Performance
Plus 10 cams, $100 core added in cart for cam cores, $45 shipping added to
order, add a shim rental set to your order if you need them (full refund
given on shims when returned, i.e. free shim rental with cam purchase) IN
STOCK |
SNP-P10C |
750.00 |
|
| SHO NUT Performance
Plus 10 intake/Plus 40 exhaust cam mix, $100 core added in cart for cam
cores, $45 shipping added to order, add a shim rental set to your order if
you need them (full refund given on shims when returned, i.e. free shim
rental with cam purchase) (special order, 25% deposit for next batch) |
SNP-P10-40MC |
800.00 |
|
| SHO Tool Kit Rental for cam/spring/seal install, includes shim
tools, cam alignment tool, valve spring tools, cam seal tools, valve seal
tools, valve guide tools, front main seal tool - US$250 core added in cart.
(NOTE - only the shim tools (available on the 60K page) are required to
install the cams - these tools are more for changing the valve springs and
valve seals, should you choose to do so) |
SNP-CTC |
50.00 |
|
| |
|
|
|
| V6 Adjustable camshaft sprockets, full
set |
SNP-ACSF |
230.00 |
|
| V6 Full Sprocket set core |
SNP-ACSFC |
100.00 |
|
| V6 Adjustable camshaft sprockets,
intake only |
SNP-ACSI |
100.00 |
|
| V6 Intake Sprocket core |
SNP-ACSIC |
50.00 |
|
| V6
Adjustable camshaft sprockets, exhaust only |
SNP-ACSE |
140.00 |
|
| V6 Exhaust Sprocket core |
SNP-ACSEC |
50.00 |
|
| |
|
|
|
| Custom Wiseco forged
pistons, pins, XX (street) gapped rings. Please specify in the notes section
what you want for bore in 0.5 mm increments (89-93 mm for stock head gaskets,
or larger than 93 mm if you use custom head gaskets, as well as +0.002"
for re-hone of non-bored block, note that anything larger than 92 mm requires
a 1993-1995 block), pin diameter (ATX/22 mm or MTX/21 mm), heavy duty
(NOS/blower/turbo) or lightweight (Naturally Aspirated), and compression
ratio (up to 10.5:1 for 92 mm and non-interference with big cams, up to
10.6:1 for 93 mm and non-interference with big cams, or up to around (new) 12.5:1 for
non-interference with stock cams). 5-7 weeks delivery, so only a 50% deposit
added to your cart. |
SNP-CWP |
830.00 |
|
| Sample
pistons for a 3.0L MTX engine that has been honed 0.002" |
|
|
|
| Wiseco forged pistons,
pins, XX rings, 89 mm bore +0.002" (re-hone MTX block) (3.0L), 21 mm
(MTX) pin, 8.5:1 compression ratio, HD for blower/turbo. 5-7 weeks delivery,
so only a 50% deposit added to your cart. |
SNP-WP89H2185HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 89 mm bore +0.002" (re-hone MTX block) (3.0L), 21 mm
(MTX) pin, 10:1 compression ratio, HD for NOS. 5-7 weeks delivery, so only a
50% deposit added to your cart. |
SNP-WP89H2110HD |
830.00 |
|
| Sample
pistons for a bored out 3.0L MTX engine |
|
|
|
| Wiseco forged pistons,
pins, XX rings, 92 mm bore (3.2L), 21 mm (MTX) pin, 8.5:1 compression ratio,
HD for blower/turbo. 5-7 weeks delivery, so only a 50% deposit added to your
cart. |
SNP-WP922185HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 92 mm bore (3.2L), 21 mm (MTX) pin, 10:1 compression ratio,
HD for NOS. 5-7 weeks delivery, so only a 50% deposit added to your cart. |
SNP-WP922110HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 92 mm bore (3.2L), 21 mm (MTX) pin, 10.5:1 compression ratio,
HD for NOS. 5-7 weeks delivery, so only a 50% deposit added to your cart. |
SNP-WP9221105HD |
830.00 |
|
| Sample
pistons for a bored out 1993-1995 3.0L MTX engine |
|
|
|
| Wiseco forged pistons,
pins, XX rings, 93 mm bore (3.3L), 21 mm (MTX) pin, 8.5:1 compression ratio,
HD for blower/turbo, requires 1993-1995 block. 5-7 weeks delivery, so only a
50% deposit added to your cart. |
SNP-WP932185HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 93 mm bore (3.3L), 21 mm (MTX) pin, 10:1 compression ratio,
HD for NOS, requires 1993-1995 block. 5-7 weeks delivery, so only a 50%
deposit added to your cart. |
SNP-WP932110HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 93 mm bore (3.3L), 21 mm (MTX) pin, 10.6:1 compression ratio,
HD for NOS, requires 1993-1995 block. 5-7 weeks delivery, so only a 50%
deposit added to your cart. |
SNP-WP9321106HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 93 mm bore (3.3L), 21 mm (MTX) pin, 10.6:1 compression ratio,
lightweight, requires 1993-1995 block. 5-7 weeks delivery, so only a 50%
deposit added to your cart. |
SNP-WP9321106LW |
830.00 |
|
| Sample
pistons for a 3.2L ATX engine that has been honed 0.002" |
|
|
|
| Wiseco forged pistons,
pins, XX rings, 92 mm bore +0.002" (re-hone ATX block) (3.2L), 22 mm
(ATX) pin, 8.5:1 compression ratio, HD for blower/turbo. 5-7 weeks delivery,
so only a 50% deposit added to your cart. |
SNP-WP92H2285HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 92 mm bore +0.002" (re-hone ATX block) (3.2L), 22 mm
(ATX) pin, 10:1 compression ratio, HD for NOS, requires 1993-1995 block. 5-7
weeks delivery, so only a 50% deposit added to your cart. |
SNP-WP92H2210HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 92 mm bore +0.002" (re-hone ATX block) (3.2L), 22 mm
(ATX) pin, 10.5:1 compression ratio, HD for NOS, requires 1993-1995 block.
5-7 weeks delivery, so only a 50% deposit added to your cart. |
SNP-WP92H22105HD |
830.00 |
|
| Sample
pistons for a bored out 3.2L ATX engine |
|
|
|
| Wiseco forged pistons,
pins, XX rings, 93 mm bore (3.3L), 22 mm (ATX) pin, 8.5:1 compression ratio,
HD for blower/turbo, requires 1993-1995 block. 5-7 weeks delivery, so only a
50% deposit added to your cart. |
SNP-WP932285HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 93 mm bore (3.3L), 22 mm (ATX) pin, 10:1 compression ratio,
HD for NOS, requires 1993-1995 block. 5-7 weeks delivery, so only a 50%
deposit added to your cart. |
SNP-WP932210HD |
830.00 |
|
| Wiseco forged pistons,
pins, XX rings, 93 mm bore (3.3L), 22 mm (ATX) pin, 10.6:1 compression ratio,
HD for NOS, requires 1993-1995 block. 5-7 weeks delivery, so only a 50%
deposit added to your cart. |
SNP-WP9322106HD |
830.00 |
|
| Wiseco forged pistons, pins, XX rings, 93 mm bore (3.3L), 22 mm
(ATX) pin, 10.6:1 compression ratio, lightweight, requires 1993-1995 block.
5-7 weeks delivery, so only a 50% deposit added to your cart. |
SNP-WP9322106LW |
830.00 |
|
| |
|
|
|
| Team Dynamics Pro Race 1.2 wheels, 16x7, Flat Black, (35 mm offset IN STOCK) (ON SALE - regular low SHO NUT
price US$760 shipped) |
SNP-TDPR1.2167B |
720.00 |
|
| Team Dynamics Pro Race 1.2 wheels, 16x7, Silver, White,
Anthricite (25% deposit) (ON SALE - regular low SHO NUT price US$760 shipped) |
SNP-TDPR1.2167 |
720.00 |
|
| |
|
|
|
| Team Dynamics Pro Race 1.2 wheels, 17x7, Silver, White, Bronze,
Flat Black or Anthracite (25% deposit) (ON SALE - regular low SHO NUT price US$820 shipped) |
SNP-TDPR1.2177 |
768.00 |
|
| Team Dynamics Pro Race 3 wheels, 17x7, Silver, White, Bronze,
Flat Black or Anthracite (25% deposit) (ON SALE - regular low SHO NUT price US$820 shipped) |
SNP-TDPR2177 |
768.00 |
|
| |
|
|
|
| Team Dynamics Pro Race 1.2 wheels, 17x8, Silver, White, Flat
Black or Anthracite (IN STOCK) (4) (ON SALE - regular low SHO NUT price US$980 shipped) |
SNP-TDPR1.2178-4 |
880.00 |
|
| Team Dynamics Pro Race 1.2 wheels, 17x8, Silver, White, Flat
Black or Anthracite (IN STOCK) (6) (ON SALE - regular low SHO NUT price US$1,470 shipped) |
SNP-TDPR1.2178-6 |
1,260.00 |
|
| |
|
|
|
| Team Dynamics Pro Race 1.2 wheels, 18x8, White, Silver, Flat
Black or Anthracite (25% deposit) (ON SALE - regular low SHO NUT price US$1080 shipped) |
SNP-TDPR1.2188 |
960.00 |
|
|
|
|
|
| Bolt-on basic fuel pressure
regulator kit (mounts on the firewall, required for larger-than-stock fuel
pumps) |
SNP-BFPRK |
280.00 |
|
| Bolt-on HIGH FLOW fuel
pressure regulator kit (mounts on the firewall, required for
larger-than-stock fuel pumps, includes basic kit plus high-flow feed line
with fuel pump adaptor, fuel filter, fuel manifold and dual dedicated rail
feed lines) |
SNP-HFFPRK |
700.00 |
|
| HIGH FLOW Upgrade to Bolt-on
basic fuel pressure regulator kit (adds high-flow feed line with fuel pump
adaptor, fuel filter, fuel manifold and dual dedicated rail feed lines) US$50
refundable deposit added in cart for return of rail line in basic kit |
SNP-BFPRKHFU |
420.00 |
|
| Optional underhood pressure
gauge for regulator |
SNP-FPRUHG |
50.00 |
|
| |
|
|
|
| ACCEL 48 lb/hr injectors, set of 6, modified to fit the V6, for
STOCK rails, does NOT require rail mods, direct replacement for stock
injectors, includes rail o-rings, now WITH head seals and injector-to-rail
spacer gaskets (LIMITED SETS IN STOCK) |
SNP-A48SR |
415.00 |
|
| ACCEL 48 lb/hr injectors, set of 6, modified to fit the V6, for
MODIFIED rails, direct replacement for any existing Bosch style injectors
that fit a modified rail, includes rail -rings, now WITH head seals and
injector-to-rail spacer gaskets (special order) |
SNP-A48MR |
415.00 |
|
| *NEW* ACCEL 36 lb/hr injectors, set of 6, modified to fit the
V6, for STOCK rails, does NOT require rail mods, direct replacement for stock
injectors, includes rail o-rings, now WITH head seals and injector-to-rail
spacer gaskets (special order) |
SNP-A36SR |
340.00 |
|
| ACCEL 36 lb/hr injectors, set of 6, modified to fit the V6, for
MODIFIED rails, direct replacement for any existing Bosch style injectors
that fit a modified rail, includes rail -rings, now WITH head seals and
injector-to-rail spacer gaskets (special order) |
SNP-A36MR |
340.00 |
|
| |
|
|
|
| TwEECer RT real-time
datalogger and tuning module for the EEC (NEW LOW
PRICE) |
SNP-TRT |
450.00 |
ADD |
| |
|
|
|
| MAF Flange Adaptor
Plate, fits Mark VIII 80 mm, Lightning 80 mm and Lightning 90 mm MAF's |
SNP-80MAP |
50.00 |
|
| |
|
|
|
| 9
inch Adapter harness for square-connector OBD-II MAF
such as the Lightning MAF's - plugs into your OBD-I harness oval MAF
connector without cutting or splicing - so you can run a Lightning MAF in
your OBD-I car such as the V6 SHO or 5.0L Mustang (NEW LOW PRICE) |
SNP-LMAH |
39.95 |
|
| 7 foot Adapter EXTENSION harness for
square-connector OBD-II MAF such as the Lightning MAF's - plugs into your
OBD-I harness oval MAF connector without cutting or splicing - so you can run
a Lightning MAF in your OBD-I car such as the V6 SHO or 5.0L Mustang (NEW PART) |
SNP-LMAHE |
49.95 |
|
| 9 inch Adapter harness for slot style Gen 2 OBD-II MAF such as
the 2005+ Mustang and PMAS Slot MAF's - plugs into your OBD-I harness oval
MAF connector without cutting or splicing - so you can run a Slot MAF in your
OBD-I car such as the V6 SHO or 5.0L Mustang |
SNP-SMAH |
49.95 |
|
| PMAS
HPX 05+ Slot Style MAF Sensor, 200-1000 WHP |
SNP-PHSMS |
199.00 |
|
| Steel
Flange for above Slot Style MAF Sensor |
SNP-SLOTS |
39.99 |
|
| Aluminum
Flange for above Slot Style MAF Sensor |
SNP-SLOTA |
39.99 |
|
| OBD-I (oval)
MAF extension harness kit, enough wire to be 7' long, male and female, plug
and play |
SNP-MEH |
39.95 |
|
| OBD-I (oval)
MAF harness kit, enough wire to be 7' long, female only - for a hardwired
extension or addition of a MAF to an SD car (EEC pins, MAF EEC or MAF not
included) |
SNP-MH |
24.95 |
|
| Black
connector HEGO (O2 sensor) extension harness kit, enough wire to be 3' long,
pair |
SNP-HEH |
39.95 |
|
| Black
connector HEGO (O2 sensor) extension harness assembly, pre-assembled,
17" long, pair |
SNP-HEHA |
35.95 |
|
| Sealed Ford 4-pin connector pair, with pins for making your own
underhood connections for your own wiring (Ford purple HEGO connectors) |
SNP-4PSC |
18.00 |
|
| Sealed Ford 2-pin connector pair, with pins for making your own
underhood connections for your own wiring (Ford black connectors, also fits
ECT, ACT, EATC interlock, and under-hood tach test port/connector) |
SNP-2PSC |
15.00 |
|
| |
|
|
|
| Original V6 and V8 Aluminum Cup-Style Subframe Bushings
(REQUIRES 2 Subframe Recall KITS) (These are the original cup-style bushings) |
SNP-ASB |
100.00 |
|
| Original V6 and V8 Aluminum Cup-Style Subframe Bushings (WITH 1
recall kit, needs one more, for cars that already have the recall done)
(These are the original cup-style bushings) |
SNP-ASB1R |
123.00 |
|
| Original V6 and V8 Aluminum Cup-Style Subframe Bushings (WITH 2
recall kits, for cars that don't have the recall done) (These are the
original cup-style bushings) |
SNP-ASB2R |
145.00 |
|
| |
|
|
|
| V6 Intrax Springs, Front and Rear (4) |
SNP-IS |
250.00 |
|
| |
|
|
|
| V6 Koni Strut Inserts, Front and LONG BODY Rear (4) (does NOT
include bumpers or bellows) (LONG BODY is 4" from the rear strut pinch
bolt centreline to strut housing bottom) (out of stock) |
SNP-KLBI |
700.00 |
|
| V6 Koni Strut Inserts, Front and SHORT BODY Rear (4) (does NOT
include bumpers or bellows) (SHORT BODY is 2.25" from the rear strut
pinch bolt centreline to strut housing bottom) |
SNP-KSBI |
750.00 |
|
| V6 Koni Strut Inserts, Front (2) (does NOT include bumpers or
bellows) |
SNP-KIF |
350.00 |
|
| |
|
|
|
| Suspension Bushings (quantities are enough for ONE CAR
unless indicated otherwise) |
|
|
|
| Modified
ES Front Greasable Sway Bar Bushings (with angled grease fitting) |
|
|
|
| 19 mm Polyurethane GREASABLE front sway bar to body bushings (2) |
SNP-19FSBB |
20.95 |
|
| 20.5 mm Polyurethane GREASABLE front sway bar to body bushings
(2) |
SNP-20.5FSBB |
20.95 |
|
| 22 mm Polyurethane GREASABLE front sway bar to body bushings (2) |
SNP-22FSBB |
20.95 |
|
| 23 mm Polyurethane GREASABLE front sway bar to body bushings (2) |
SNP-23FSBB |
20.95 |
|
| 24 mm Polyurethane GREASABLE front sway bar to body bushings (2) |
SNP-24FSBB |
20.95 |
|
| Moog TPR Suspension Bushings (quantities are
enough for ONE CAR unless indicated otherwise) |
|
|
|
| TPR rear sway bar to body bushings (fit 25 or 26 mm) (2) |
K8761 |
27.20 |
|
| TPR HD rear endlink kits (2 packages) |
K3124 |
53.57 |
|
| V6 TPR front tension strut to subframe bushings (2 in one
package) |
K8516 |
43.15 |
|
| V6 TPR front tension strut to lower control arm bushings (2
packages) |
K8613 |
20.32 |
|
| V6 TPR rear tension strut to body bushings (2 packages) |
K8675 |
102.19 |
|
| V6 TPR rear tension strut to knuckle bushings (2 packages) |
K8649 |
29.86 |
|
| |
|
|
|
| MTX
Quaife ATB |
MTX |
|
|
| |
|
|
|
| SHO NUT Reinforced
Front V6 MTX Mount (obsolete) |
SNP-RFMM |
225.00 |
|
| SHO NUT Reinforced
Rear V6 MTX Mount (obsolete, limited stock available) |
SNP-RRMM |
200.00 |
|
| SHO NUT EXTREME
Reinforced Front V6 MTX Mount (obsolete) |
SNP-ERFMM |
235.00 |
|
| SHO NUT EXTREME
Reinforced Rear V6 MTX Mount (obsolete) |
SNP-ERRMM |
210.00 |
|
| Stock Mounts |
Motor
Mounts |
|
|
| |
|
|
|
| ATe Super
Blue Racing Brake Fluid |
Brakes |
|
|
| |
|
|
|
| Carbotech
Brake Pads |
Brakes |
|
|
| |
|
|
|
| Diff Shim
Tool (tool + 2 spacer blocks only) |
MTX |
|
|
| |
|
|
|
| H-brace
(painted black) for rear suspension |
SNP-HB |
60.00 |
|
| |
|
|
|
| TCE rear
knuckle braces |
SNP-TCERKB |
75.00 |
|
| |
|
|
|
| Rod Shifter Ball AND Socket bushing (2 parts, includes socket
bushing above, ball installs on bottom of shifter with set screws) (Includes
shipping) |
SNP-RSBB |
42.00 |
|
| |
|
|
|
| HD axles without ABS
rings (Stage V, 600+ HP) http://www.driveshaftshop.com (not on their site) |
MTX |
|
|
| HD axles with ABS
rings (Stage V, 600+ HP) http://www.driveshaftshop.com (not on their site) |
MTX |
|
|
| |
|
|
|
| DVD Video Library - 60K and Clutch Install/MTX Rebuild/Quaife
Install combo ($10 off reg price) |
SNP-DVDVL |
45.00 |
|
| 2004 Convention DVD (free shipping) |
SNP-2004CDVD |
30.00 |
|
| |
|
|
|
| SHO Source
40 mm Big Bore Butterflies (assembled) (US$40 refundable core will be added
to the cart) |
SS-BBB |
189.99 |
|
| |
|
|
|
| SHO Source
V6 Intake Coupler Hoses 89-95 (WITHOUT clamps) (FREE USA SHIPPING) |
SHOS-6ICH |
49.99 |
|
| SHO Source
V6 Intake Coupler Hoses 89-95 WITH clamps (FREE USA SHIPPING) |
SHOS-6ICHC |
74.99 |
|
| |
|
|
|
| SHO
Source Custom Oil Cap 89-95, including their $10 shipping |
SHOS-OC |
59.99 |
|
| |
|
|
|
| PLX Products |
|
|
|
| Note: We sell PLX
products at their MAP (Minimum Advertised Price) If you purchase PLX products from a company that sells below
the MAP, PLX's policy is that they will not honour warranty or provide any
support for products bought below MAP. |
|
|
|
| |
|
|
|
| Bosch LSU4-based Wideband Setups (include sensor) |
|
|
|
| PLX SM-AFR Gen
2 Wideband controller for included LSU4 sensor (use PLX gauge below or with
datalogger, display not included) |
PLX-SM-AFR |
142.49 |
|
| PLX SM-AFR Gen
2 and DM-6 Display Combo (save $47.49 over buying separately) |
PLX-SMGC |
189.99 |
|
| PLX SM-AFR Gen
1 and DM-5 Display Combo (while supplies last) |
PLX-SMAFRGC |
180.49 |
|
| PLX SM-AFR and
DM-100 Display |
PLX-SMDM100GC |
341.98 |
|
| PLX M-300TE
Wideband controller WITH integrated display for included LSU4 sensor |
PLX-M-300TE |
300.19 |
|
| |
|
|
|
| Accessories for the above wideband setups |
|
|
|
| DM-6 single 2
1/16 inch Gauge, programmable digital plus full-sweep LED (for any SM module) |
PLX-DM-6 |
94.99 |
|
| DM-100 OBD II
Intelligent Multi-Functional Display (iMFD) OLED 2 1/16 gauge (for any SM
module) |
PLX-DM-100 |
199.49 |
|
| iMFD SM to
USB Adapter (for any SM module) - allows streaming of up to 32 sensors at
once |
PLX-iMFD-SM-USB |
66.49 |
|
| PLX Narrowband to Wideband Gauge Converter (special price)
(ONLY used with a PLX WB) |
PLX-NBC |
30.00 |
|
| PLX SM-EGT
Exhaust Gas Temperature controller for included EGT probe (use PLX gauge or
with datalogger, display not included) |
PLX-SM-EGT |
119.69 |
|
| PLX SM-Fluidtemp
2-channel Fluid Temperature controller for included 2 fluid temp sensors (use
PLX gauge or with datalogger, display not included) |
PLX-SM-Fluidtemp |
104.49 |
|
| PLX SM-Vac/Boost
3-Bar Vacuum/Boost sensor/controller (use PLX gauge or with datalogger,
display not included) |
PLX-SM-Vac/Boost |
94.99 |
|
| PLX SM-AIT Air
Intake Temperature controller for include thermocouple probe (use PLX gauge
or with datalogger, display not included) |
PLX-SM-AIT |
119.69 |
|
| PLX SM-Fluid
Pressure controller for included oil pressure sender (sender not compatible
with fuel) (use PLX gauge or with datalogger, display not included) |
PLX-SM-OP |
123.49 |
|
| O2 Sensor
Bung (reccomended for ALL WB installations) |
PLX-WBSB |
8.54 |
|
| O2 Sensor
Bung AND Plug |
PLX-WBSPB |
12.34 |
|
| Kiwi |
PLX-K |
199.99 |
|
| Kiwi MPG |
PLX-KM |
89.99 |
|
| Kiwi Wifi (iPhone) |
PLX-KW |
149.99 |
|
| Kiwi Wifi + iMFD |
PLX-KWI |
199.99 |
|
| Kiwi Bluetooth
(Android) |
PLX-KB |
99.99 |
|
| 2-axis
G-force sensor to directly measure the effects of torque (can be used with
any 0-5V logger) |
PLX-GFS |
75.99 |
|
|
|
|
|